How to Fix PETG Stringing, Bed Adhesion and Moisture on Tronxy Transparent Orange 1.75mm
Podle XIN WANG

How to Fix PETG Stringing, Bed Adhesion and Moisture on Tronxy Transparent Orange 1.75mm

PETG Filament Print Settings: 230–250°C Nozzle, 80–90°C Plate for Tronxy Transparent Orange 1.75mm
Podle XIN WANGVfan 0-50%, glass Bluetape PEI Buildtak, HC-1KG-PETG-Orange-1, nozzle 230-250C, PETG filament print settings

PETG Filament Print Settings: 230–250°C Nozzle, 80–90°C Plate for Tronxy Transparent Orange 1.75mm

PETG vs PLA vs ABS Filament: Which Spool Fits a Tronxy Transparent Orange Buyer in 2026?
Podle XIN WANGV1.75mm transparent filament, FDM material choice 2026, glossy 3D printing material, PETG heat resistance, PETG hygroscopicity

PETG vs PLA vs ABS Filament: Which Spool Fits a Tronxy Transparent Orange Buyer in 2026?

Best PETG Filament 1kg 2026: Tronxy Transparent Orange Review vs SUNLU, Overture and eSUN Class Spools
Podle XIN WANGV1.75mm PETG accuracy, best PETG filament 1kg, glossy PETG 2026, PETG filament 1.75mm, PETG filament drying

Best PETG Filament 1kg 2026: Tronxy Transparent Orange Review vs SUNLU, Overture and eSUN Class Spools

How to Fix Nylon Warping, Stringing and Layer Adhesion on White 1.75mm PA Filament
Podle XIN WANGVchamber 55-60C, dry box below 15% RH, dry nylon 80C 12h, HC-1KG-PA-White, layer adhesion weak

Jak vyřešit kroucení, tvorbu vláken a špatnou přilnavost vrstev u bílého nylonového filamentu PA o průměru 1.75mm

Nylon Filament Drying and Print Temperature: 240–260°C Settings for Tronxy White 1.75mm
Podle XIN WANGVall-metal hotend, bed 80-110C, chamber 55-60C, dry 70-80C 6-12h, HC-1KG-PA-White

Sušení nylonového filamentu a teplota tisku: nastavení 240–260°C pro bílý filament Tronxy 1.75mm