How to Fix PETG Stringing, Bed Adhesion and Moisture on Tronxy Transparent Orange 1.75mm
Door XIN WANG

How to Fix PETG Stringing, Bed Adhesion and Moisture on Tronxy Transparent Orange 1.75mm

PETG Filament Print Settings: 230–250°C Nozzle, 80–90°C Plate for Tronxy Transparent Orange 1.75mm
Door XIN WANGInfan 0-50%, glass Bluetape PEI Buildtak, HC-1KG-PETG-Orange-1, nozzle 230-250C, PETG filament print settings

PETG Filament Print Settings: 230–250°C Nozzle, 80–90°C Plate for Tronxy Transparent Orange 1.75mm

PETG vs PLA vs ABS Filament: Which Spool Fits a Tronxy Transparent Orange Buyer in 2026?
Door XIN WANGIn1.75mm transparent filament, FDM material choice 2026, glossy 3D printing material, PETG heat resistance, PETG hygroscopicity

PETG vs PLA vs ABS Filament: Which Spool Fits a Tronxy Transparent Orange Buyer in 2026?

Best PETG Filament 1kg 2026: Tronxy Transparent Orange Review vs SUNLU, Overture and eSUN Class Spools
Door XIN WANGIn1.75mm PETG accuracy, best PETG filament 1kg, glossy PETG 2026, PETG filament 1.75mm, PETG filament drying

Best PETG Filament 1kg 2026: Tronxy Transparent Orange Review vs SUNLU, Overture and eSUN Class Spools

How to Fix Nylon Warping, Stringing and Layer Adhesion on White 1.75mm PA Filament
Door XIN WANGInchamber 55-60C, dry box below 15% RH, dry nylon 80C 12h, HC-1KG-PA-White, layer adhesion weak

Hoe je kromtrekken, draadvorming en slechte laaghechting voorkomt met wit PA-filament van 1.75mm nylon

Nylon Filament Drying and Print Temperature: 240–260°C Settings for Tronxy White 1.75mm
Door XIN WANGInall-metal hotend, bed 80-110C, chamber 55-60C, dry 70-80C 6-12h, HC-1KG-PA-White

Nylonfilament drogen en printtemperatuur: instellingen van 240–260°C voor Tronxy White 1.75mm