How to Fix PETG Stringing, Bed Adhesion and Moisture on Tronxy Transparent Orange 1.75mm
Przez XIN WANG

How to Fix PETG Stringing, Bed Adhesion and Moisture on Tronxy Transparent Orange 1.75mm

PETG Filament Print Settings: 230–250°C Nozzle, 80–90°C Plate for Tronxy Transparent Orange 1.75mm
Przez XIN WANGWfan 0-50%, glass Bluetape PEI Buildtak, HC-1KG-PETG-Orange-1, nozzle 230-250C, PETG filament print settings

PETG Filament Print Settings: 230–250°C Nozzle, 80–90°C Plate for Tronxy Transparent Orange 1.75mm

PETG vs PLA vs ABS Filament: Which Spool Fits a Tronxy Transparent Orange Buyer in 2026?
Przez XIN WANGW1.75mm transparent filament, FDM material choice 2026, glossy 3D printing material, PETG heat resistance, PETG hygroscopicity

PETG vs PLA vs ABS Filament: Which Spool Fits a Tronxy Transparent Orange Buyer in 2026?

Best PETG Filament 1kg 2026: Tronxy Transparent Orange Review vs SUNLU, Overture and eSUN Class Spools
Przez XIN WANGW1.75mm PETG accuracy, best PETG filament 1kg, glossy PETG 2026, PETG filament 1.75mm, PETG filament drying

Best PETG Filament 1kg 2026: Tronxy Transparent Orange Review vs SUNLU, Overture and eSUN Class Spools

How to Fix Nylon Warping, Stringing and Layer Adhesion on White 1.75mm PA Filament
Przez XIN WANGWchamber 55-60C, dry box below 15% RH, dry nylon 80C 12h, HC-1KG-PA-White, layer adhesion weak

Jak naprawić problemy z wyginaniem, nitkowaniem i przyczepnością warstw białego filamentu PA 1.75mm

Nylon Filament Drying and Print Temperature: 240–260°C Settings for Tronxy White 1.75mm
Przez XIN WANGWall-metal hotend, bed 80-110C, chamber 55-60C, dry 70-80C 6-12h, HC-1KG-PA-White

Suszenie filamentu nylonowego i temperatura druku: ustawienia 240–260°C dla białego filamentu Tronxy 1.75mm